FDM/FFF 3D printing

Although most people who 3D print despise the bed leveling process, it’s pretty simple, and there are several ways to do it, such as with paper or a feeler gauge.

Painter’s tape comes in more than a dozen hues, but most 3D printing enthusiasts use blue or green, while some have tried both.

Feed rate and flow rate are two very different things in the world of 3D printing, and confusing one with the other could lead you to inaccurate information if you’re trying to fix an issue with your printer.

Trying to decide whether to print inside-out or outside-in can be difficult, especially if you’re printing a very ornate object and want the finished product to be as high-quality as possible.

Both extruders produce excellent results, but they have unique features you’ll want to consider before making your purchase. So, direct drive vs. Bowden extruder: what are the differences?

Replacing specific 3D printer components can increase its lifetime. Is the stepper motor one of the components you need to worry about replacing?

A 3D printer can print at various speeds, subject to the associated parameters and settings. However, these speeds aren’t similar for all 3D printers, and factors such as your printing material can alter your speed. Considering all these variables, you’re probably wondering how fast a 3D printer prints? A 3D printer can print PLA as …

3D printer parts will need replacing after a specific timeframe or amount of use, but when is it time to replace your hotend?

3D printing is a long process that requires exact measurements and a solid foundation for the build, including the top layer.

A 3D printer blob of death is a dreaded occurrence for any 3D printer owner. It shows that something has gone wrong with your printing and can often lead to a ruined print. However, what exactly is a 3D printer blob of death?