Prusaslicer

Is filtering resin necessary after each 3D print? Learn the benefits of filtering and how often it should be done.

Unleash your creativity with xTool D1 PRO! Compact, powerful laser cutter/engraver for stunning designs. Dive into our captivating review!

Always remove filament after printing to protect it from moisture and dust, which can affect the quality of prints. Store it properly in an airtight container.

ABS is harder to sand than PLA because of its denser nature. PLA is softer and easier to sand with fine grit sandpaper.

Brass nozzle for PLA lasts 3-6 months. Factors: print frequency, print size/complexity, material, nozzle quality. High-quality nozzles cost more, but last longer. Nozzle replacement requires wrench, 7mm socket, and socket wrench. Heat hot end, unscrew, replace.

3D printer nozzle cleaning frequency depends on usage & material printed, but generally, every 3 months.

3D printing copyrighted material is illegal and violates intellectual property rights. Infringing on these rights can result in legal consequences.

3D prints can become spongy due to under-extrusion, over-extrusion, low infill and incorrect first-layer settings.

Small 3D printers are cost-effective, versatile and fun for beginners, hobbyists and even for kids. They can also be used for earning money and saving cost by printing things you need at home.

Printing ABS at too high temp causes issues like stringing, sagging, poor surface quality, and toxic fumes. Best temp range is 210-260°C to ensure proper melting without burning.